P110 Standard Pressure Switch
Company Name : Wasco
Activation Point Range:
- 1.0 – 500 PSI
Temperature Range:
- -65° F to + 225° F
Leak Rate:
- ≤1.0 x 10-3 cc/min Air
Weight:
- 3.5 oz (typical with 12 inch “W3” electrical interface)
Electrical Rating :
| Max. Amp Rating | 1 | 5 | 7 |
|---|---|---|---|
| Volts AC/DC | 115/28 | 250/28 | 250/28 |
| Inductive | |||
| Amp Resistive | 1/1 | 5/5 | 7/7 |
| Amp Material | 1/0.5 | 5/3 | 7/4 |
| Contact | Gold | Silver | Silver |
Technical Specifications
Material Specifications P110:
Wetted
| Body/Fitting | 300 Series Stainless Steel |
| Locking Compound | Loctite 277 |
| O-Ring | Buna N, other compounds available |
| Sensor | 17-7PH Stainless Steel and 300 Series Stainless SteelStainless Steel |
Material Specifications P110:
Non Wetted
| Electrical Interface | Steel (zinc chromate finish) |
| Lock Ring | Steel (zinc chromate finish) |
Pressure Switch Adjustment (if field adjustable)
This model may be adjusted by loosening the Lock Ring and turning the electric switch housing counter clockwise to raise the activation point, clockwise to lower the activation point. Holding the electric switch housing in position, tighten the Lock Ring and check the activation point. Repeat preceding adjustment instructions if necessary.